PAGE CONTENTS: (click ⇒ to go to each section on this page)
⇒ Topic Treatment: Introduction, Background, Details, etc.
⇒ Directory of Vendors w/Links to Vendor's EAB Webpage with Details, Products, etc.
⇒ Related Media: Articles, Books, Magazines, Documentation, Videos, Websites, etc.
⇒ Related EAB Webpages & Main Topic Pages with Links.
⇒ Visit our FEATURED ARTICLES Home Page. Thanks to our amazing contributors.
⇒ This Month's Top 20 Most Popular Articles on our EAB website.
⇒ What our nonprofit Anchors Aweigh Academy and its EAB website have accomplished.
⇒ Members must SIGN IN to gain access to Members Only areas of this website.
⇒ Become an Academy Member and gain access to additional pages and programs!
⇒ Comments for everyone to view: Submit to⇒Comments@EverythingAboutBoats.org.
Flywheel & Housing SAE Specs (SAE J620 and J621 Details)
|Typical Industrial Power Take Off Dimensions|
|Ball, Main Bearing||6 1/2″ & 7 1/2″||1.68″||1.19″||5.56″||3.5″||1.438″|
|Taper Roller Main Bearings||6 1/2″ & 7 1/2″||1.68″||1.19″||7.06″||3.5″||1.438″|
|Taper Roller Main Bearings||8″||1.44″||2.24″||7.06″||6.0″||1.750″|
|Taper Roller Main Bearings||10″||1.75″||2.12″||8.63″||5.5″||2.250″|
|Taper Roller Main Bearings||C111TD||1.75″||2.12″||8.63″||5.5″||2.250″|
|Taper Roller Main Bearings||1P – 11 1/2″||2.26″||1.56″||9.25″||6.5″||2.250″|
|Taper Roller Main Bearings||2P – 11 1/2″||2.31″||1.56″||9.63″||6.5″||2.500″|
|Taper Roller Main Bearings||1P – 14″||2.82″||1.0″||12.13″||8.5″||3.000″|
|Taper Roller Main Bearings||2P – 14″||2.82″||1.0″||13.75″||10.0″||3.500″|
|Taper Roller Main Bearings||3P – 14″||2.82″||1.0″||14.50″||10.0″||3.938″|Dimensions for identification purposes only.
SAE Engine Housing Dimensions
SAE ‘ A ” ‘ B ” ‘ G ”
SIZE Dia. Dia. Qty. Size
OO 33.500 31.000 16 1/2” – 13
O 26.750 25.500 16 1/2 ” – 13
1/2 24.375 23.000 12 1/2” – 13
1 20.875 20.125 12 7/16” – 14
2 18.375 17.625 12 3/8” – 16
3 16.875 16.125 12 3/8” – 16
4 15.000 14.250 12 3/8” – 16
5 13.125 12.375 8 3/8” – 16
6 11.250 10.500 8 3/8” – 16
Dimensions E and F may vary, measure to verify if unknown.
SAE Engine Flywheel Dimensions
SAE ‘C’ ‘D’ ‘E’ ‘F’ ‘H’
SIZE Dia. Dia. Dia. Qty Size
6 – 1/2 8.500 7.875 1.19 2.05 6 5/16″ – 18
7 – 1/2 9.500 8.750 1.19 2.05 8 5/16″ – 18
8 10.375 9.625 2.44 2.44 6 3/8″ – 16
10 12.375 11.625 2.12 2.83 8 3/8″ – 16
11 – 1/2 13.875 13.125 1.56 2.83 8 3/8″ – 16
14 18.375 17.250 1.00 3.14 8 1/2” – 13
18 22.500 21.250 0.62 3.93 6 5/8″ – 11
21 26.500 25.250 0.00 5.11 12 5/8″ – 11
24 28.875 27.250 0.00 5.11 12 3/4″ – 10
Typical Industrial Power Take Off Dimensions
Clutch Size ‘J’ ‘K’ ‘L’ ‘M’ ‘S’
Ball, Main Bearing 6 1/2″ & 7 1/2″ 1.68″ 1.19″ 5.56″ 3.5″ 1.438″
Taper Roller Main Bearings 6 1/2″ & 7 1/2″ 1.68″ 1.19″ 7.06″ 3.5″ 1.438″
Taper Roller Main Bearings 8″ 1.44″ 2.24″ 7.06″ 6.0″ 1.750″
Taper Roller Main Bearings 10″ 1.75″ 2.12″ 8.63″ 5.5″ 2.250″
Taper Roller Main Bearings C111TD 1.75″ 2.12″ 8.63″ 5.5″ 2.250″
Taper Roller Main Bearings 1P – 11 1/2″ 2.26″ 1.56″ 9.25″ 6.5″ 2.250″
Taper Roller Main Bearings 2P – 11 1/2″ 2.31″ 1.56″ 9.63″ 6.5″ 2.500″
Taper Roller Main Bearings 1P – 14″ 2.82″ 1.0″ 12.13″ 8.5″ 3.000″
Taper Roller Main Bearings 2P – 14″ 2.82″ 1.0″ 13.75″ 10.0″ 3.500″
Taper Roller Main Bearings 3P – 14″ 2.82″ 1.0″ 14.50″ 10.0″ 3.938″
More from Capitol Marine Gears
Adapter Plates must 1) match up and bolt onto the flywheel. 2) absorb the torsional impulses created by the engine during each power stroke so they don’t cause gear chatter in the marine gear, and 3) match the spline of the input shaft of the marine gear. Note that the damper function is incorporated into the new dual-mass flywheel technology where the dampening is much more effective however the flywheel bushings are vulnerable to early failure due at least in part to exposure to the marine environment.
They work in the dark, are often soaked in salt water, and are never checked, let alone maintained. They are the marine equivalent of a mushroom! The damper plate is bolted to the flywheel with a half dozen or so small metric allen bolts. Into this clutch like plate slides the splined input shaft of the Hurth or Borgwarner gear. The damper plate acts as coupler between the engine and the transmission and all torque is transmitted through it.
Noisy damper plate
Sometimes these hard working clutches rebel and their springs loosen up and even fall out. Or one or more of the allen bolts back out and the plate become loose and moves around. Symptoms of this will be a rattling sound from the bellhousing area when in neutral. Engaging gear is often difficult and the Hurth gear is hard to shift. Often loose or missing springs is the only problem. People often think that they need a new transmission when all they need is to replace the damper plate.
What to look for
If you suspect that your damper plate springs are loose and rattling around and that you have damper plate problems here is what to look for. First check your linkage to ensure that everything is tight and working properly. Then check that the bolts holding the damper plate in place are present and installed correctly. Verify that the Hurth or Borgwarner gear is not mis-aligned. Use a dial indicator to check for this. Finally, if the damper plate is worn and/or springs are missing, check to see that your Hurth orBorgwarner gear’s front bearing hasn’t failed. Worn damper plates can often cause the transmissions’ input shaft to wear and result in front bearing failure.
More from FoleyEngines.com
Flywheel & Transmission Adapter Housings
Drive Shafts (Jackshafts)
More from MarinePartsPlus.com
Directory of Vendors
Please do not try to contact any of the vendors on this website via our EverythingAboutBoats.org Phone, Email or Comment Systems. Your message will NOT be forwarded.
Contact vendors directly.
Forum Posts, Tech Notes & Tech Tips
|TITLE (Notes) — Creators (Authors‚ Editors‚ Publishers‚ Directors‚ Actors‚ etc) – Source||DS|
If you think we should add a Forum Post, Tech Note or Tech Tip to this section, please submit the Link via email to⇒Editor@EverythingAboutBoats.org
with Links to EAB's Media Overview and Creator Profile Pages
Media with Bold Titles are part of our Academy Library!
Academy Members can view the Media by clicking on its Bold Title Link to go to its
EAB overview page and then scrolling down to the "Academy Library" section for its link.
To help us alphabetize the book list below, each leading grammatical
article ("The" - "A" - "An") has been moved to the end of the title.
DS = Data Source code
|TITLE (Notes) — Creators (Authors‚ Editors‚ Publishers‚ Directors‚ Actors‚ etc) – Source||DS|
|ANCHOR‚ The — Anchors Aweigh Academy|
|DIY Boat Owner – The Marine Maintenance Magazine — BoatU.S. ⇒ Mad Mariner (OoB)|
If media should be added to this list, please submit via email
IF YOU ARE NOT YET AN ACADEMY MEMBER,
CLICK HERE to discover how you can become a Member and gain FULL access to
thousands of expanded pages and dozens of excellent programs including our library!
CLICK HERE to view ALL the books, magazines, videos, etc. in our Academy Library.
They are also listed by category on the Topic Pages found on the Right Sidebar ⇒
CLICK HERE to donate any books, magazines or videos to our Library.
Related EverythingAboutBoats.org Webpages
Related Main Topic & Subtopic Pages w/Links
All Website Main Topic Pages are listed in the Right Sidebar ⇒
2 – BOAT PRODUCTION:
2.1 – Boat Designing Schools.
2.2 – Boat Designers (Naval Architects, Boat Plans, Kits, etc).
2.3 – Statutes & Standards.
2.3.1 – Laws by Country.
126.96.36.199 – Laws: Canada.
188.8.131.52 – Laws: United Kingdom.
184.108.40.206 – Laws: United States.
2.3.2 – Industry Standards.
220.127.116.11 – International Maritime Organization (IMO).
18.104.22.168 – International Standards Organization (ISO).
22.214.171.124 – American Boat and Yacht Council (ABYC).
126.96.36.199 – National Fire Protection Association (NFPA).
2.3.3 – Classification Societies.
188.8.131.52 – Lloyd’s Register.
184.108.40.206 – American Bureau of Shipping.
2.4 – Boat Building Tools & Equipment (Vendors, Specs, Manuals, Recalls, etc).
2.5 – Boat Materials (Vendors, Specs, Manuals, Recalls, etc).
2.5.1 – Wood.
2.5.2 – Metal: Iron, Steel, Aluminum, etc.
2.5.3 – Ferrocement.
2.5.4 – Fiberglass.
2.6 – Boat Equipment (Vendors, Specs, Manuals, Reviews, Recalls, etc).
2.6.1 – Steering & Thrusters.
2.6.2 – Stabilizers & Trim Plates.
2.6.3 – Dewatering Devices.
2.6.4 – Galvanic Corrosion Protection.
2.6.5 – Hull Penetrations & Openings (Thru-Hulls, Scuttles, Skylights, Hatches, etc).
2.6.6 – Deck Hardware & Equipment.
220.127.116.11 – Ground Tackle.
18.104.22.168 – Commercial Fishing Gear.
2.6.7 – Rigging (Rig Types, Standing Rigging, Running Rigging, Vendors, Riggers, etc).
22.214.171.124 – Sails (Sail Types, Aerodynamics, Vendors, Sailmakers, etc).
2.6.8 – Propulsion Machinery (Types, Configurations, Features, Control Systems, etc).
126.96.36.199 – Engines: Types & Vendors.
188.8.131.52 – Engine-to-Marine Gear Interfaces (SAE Specs, Damper Plates, Jackshafts, etc).
184.108.40.206 – Marine Gears (Reversing, Reduction; Mechanical, Hydraulic).
220.127.116.11 – Shafting (Propshafts, Couplings, Seals, Bearings, Struts, Keys, Nuts, etc).
18.104.22.168 – Propellers.
2.6.9 – Electrical Systems: DC & AC (Direct Current, Alternating Current, etc).
22.214.171.124 – Auxiliary Generators.
126.96.36.199 – DC-to-AC Invertors
2.6.10 – Domestic Systems.
188.8.131.52 – LPG Systems.
184.108.40.206 – Cabin Heating & Cooling.
220.127.116.11 – Galley Appliances (Refrigeration, Galley Stoves, LPG/CNG Systems).
18.104.22.168 – Water & Waste Systems.
22.214.171.124 – Trash Disposal.
126.96.36.199 – Furnishings (Cabinetry, furniture, Coverings, Entertainment, Weather, etc).
2.6.11 – Navigation & Communication Systems.
2.6.12 – Safety Equipment (PFDs, Life Rafts, Fire Ext., Alarms, Medical Kits).
2.6.13 – Personal Equipment.
188.8.131.52 – Diving (Commercial & Sport).
184.108.40.206 – Fishing (Sport).
220.127.116.11 – Sailing (Foul Weather Gear, Safety Harnesses, etc).
18.104.22.168 – Racing (Sail, Offshore Power, Powerboat, Hydroplane, etc).
22.214.171.124 – Watersports (Surfing, Skiing, Boarding, Tubing, etc).
2.6.14 – Boat Trailers.
2.7 – Marine Suppliers by Country.
2.7.1 – Marine Suppliers: Canada.
2.7.2 – Marine Suppliers: United Kingdom.
2.7.3 – Marine Suppliers: United States.
2.8 – Boat Building Schools.
2.9 – Boat Builders: A~Z (w/Links to Model Specs, Manuals, Reviews, Recalls, etc).
2.9.1 – Boat Builders by Vessel Types.
2.9.2 – Boat Builders by Country.
126.96.36.199 – Boat Builders: Canada.
188.8.131.52 – Boat Builders: United Kingdom.
184.108.40.206 – Boat Builders: United States.
220.127.116.11.1 – Boat Builders by US MIC.
2.10 – Do-It-Yourself Boat Building.
15 – BOAT REFITTING: (Fitting-Out, Repair, Repowering, etc).
15.1 – Refitters by Country (Shipyards, Boatyards, Riggers, Shops, etc).
15.1.1 – Refitters: Canada.
15.1.2 – Refitters: United Kingdom.
15.1.3 – Refitters: United States.
15.2 – Boat Repair Schools (Hull, Systems, On-Board Equipment, Propulsion Machinery, etc).
15.3 – Do-It-Yourself Refitting (Installation, Maintenance, Troubleshooting, Repair, etc).
15.3.1 – DIY: Fundamentals.
18.104.22.168 – DIY: Tools: Usage, Safety, etc.
22.214.171.124 – DIY: Deterioration (Rot, Corrosion, Fatigue, etc).
126.96.36.199 – DIY: Troubleshooting, Failure Analysis, etc.
15.3.2 – DIY: Vessel Structure.
188.8.131.52 – DIY: Hull & Deck.
184.108.40.206 – DIY: Steering & Thrusters (Mechanical, Hydraulic, etc).
220.127.116.11 – DIY: Stabilizers & Trim Plates.
18.104.22.168 – DIY: Dewatering Devices.
22.214.171.124 – DIY: Galvanic Corrosion Protection.
126.96.36.199 – DIY: Hull Penetrations & Openings (Thru-Hulls, Scuttles, Skylights, Hatches, etc).
188.8.131.52 – DIY: Deck Hardware & Equipment.
184.108.40.206.1 – DIY: Ground Tackle (Anchors, Rode, Windlass, etc).
220.127.116.11.2 – DIY: Commercial Fishing Gear.
18.104.22.168 – DIY: Rigging.
22.214.171.124.1 – DIY: Sails.
15.3.3 – DIY: Propulsion Machinery (Control Systems, etc).
126.96.36.199 – DIY: Engines (Troubleshooting, Repair, Rebuilding vs Repowering, etc).
188.8.131.52.1 – DIY: Engine Mechanical (Pistons, Rods, Crankshafts, Blocks, Heads, Valves, etc).
184.108.40.206.2 – DIY: Engine Lubrication (Splash, Forced, Oil, Filtration, Additives, Oil Analysis, etc).
220.127.116.11.3 – DIY: Engine Fuel (Petrol/Gasoline, Diesel, CNG, etc).
18.104.22.168.4 – DIY: Engine Electrical (Starting, Charging, Instrumentation, etc).
22.214.171.124.5 – DIY: Engine Cooling (Air, Raw Water, Fresh Water, etc).
126.96.36.199.6 – DIY: Engine Exhaust (Dry, Wet, etc).
188.8.131.52.7 – DIY: Engine Mounting (Hard, Soft, etc).
184.108.40.206 – DIY: Engine-to-Marine Gear Interfaces (Adapters, Dampers, Jackshafts, etc).
220.127.116.11 – DIY: Marine Gears (Inboards, Inboard-Outboards, Outboards, Sail Drives, Pods, etc).
18.104.22.168 – DIY: Shafting (Shafts, Couplings, Joints, Thrust Bearings, Seals, Cutlass, Struts, etc).
22.214.171.124 – DIY: Propellers.
15.3.4 – DIY: Electrical Systems.
126.96.36.199 – DIY: Direct Current.
188.8.131.52 – DIY: Alternating Current.
184.108.40.206 – DIY: Auxiliary Generators.
220.127.116.11 – DIY: DC to AC Inverters.
15.3.5 – DIY: Domestic Systems.
18.104.22.168 – DIY: LPG systems.
22.214.171.124 – DIY: Cabin Heating & Cooling.
126.96.36.199 – DIY: Galley Appliances.
188.8.131.52 – DIY: Water & Waste Systems.
184.108.40.206 – DIY: Trash Disposal.
220.127.116.11 – DIY: Furnishings (Cabinetry, furniture, Coverings, Entertainment, Weather, etc).
15.3.6 – DIY: Nav & Comm Systems (Charts, Compass, GPS, Radar, Lts, Flares, EPIRB, VHF, etc).
15.3.7 – DIY: Safety Equipment (PFDs, Firefighting, Alarms, etc).
15.3.8 – DIY: Personal Equipment (Diving, Fishing, Sailing, Racing, Watersports, etc).
15.3.9 – DIY: Tenders.
15.3.10 – DIY: Boat Trailers.
16 – MEDIA w/Creator Directory (Authors, Editors, Publishers, etc) + Lending Library.
16.1 – Articles (w/Reviews).
16.2 – Books (w/Reviews).
16.3 – Magazines (w/Reviews).
16.4 – Product Documentation (SpecSheets, Installation Drawings, Manuals, Parts Books, etc).
16.5 – Videos (Movies, etc. w/Reviews).
16.6 – Websites (w/Reviews & Links).
If there is anything on this webpage that needs fixing, please let us know via email
Visit our FEATURED ARTICLES Home Page
to see examples of our website's comprehensive contents!
Thanks to our amazing contributors for the steady flow of articles, and to our dedicated all-volunteer staff who sort, polish and format them, everyday we get a little bit closer to our goal of
Everything About Boats. If you would like to submit an article,
See Submitting Articles.
— TOP 20 MOST POPULAR ARTICLES —
Ford Industrial Power Products Diesel Engines
How to Identify Ford Diesel Engines
Lehman Mfg. Co.
Detroit Diesel 8.2
Universal Atomic 4
Chrysler & Force Outboards
Eska Outboard Motors
ZF Friedrichshafen AG
American Marine Ltd (Grand Banks)
Types of Marine Surveys
Marine Surveyors by Country
Boat Builders By MIC
American Boat and Yacht Counsel (ABYC)
USCG NVIC 07-95 Guidance on Inspection, Repair and Maintenance of Wooden Hulls
What our nonprofit Anchors Aweigh Academy and its
EverythingAboutBoats.org website have accomplished so far.
- Published over 300 website main topic webpages, many with full articles on the topic. See our Website Contents in the Right Sidebar for the listing of the main topic pages.
- Published over 9,000 marine vendor webpages, all with their contact information, most with a description of their products and services, many with product documentation, specifications and independent reviews. (Includes: Boat designers, boat building tools, material and equipment manufacturers and suppliers, boat builders and dealers, yacht brokers, marine surveyors, boat insurers, boat transporters, skippers and crews, boatyards and marinas, yacht clubs, boat rentals and yacht charters, boating, seamanship and maritime schools, marine law attorneys and expert witnesses, boat refitters and repairers, book authors and publishers, and video producers)
- Acquired over 120,000 pages of product documentation including Catalogs, Brochures, SpecSheets, Pictures, Serial Number Guides, Installation Manuals, OpManuals, Parts Schematics, Parts Bulletins, Shop Manuals, Wiring Diagrams, Service Bulletins, and Recalls. And have made all viewable to academy members through the EAB website.
- Acquired over 1,200 books and magazine back issues in our academy library and so far have made over 700 viewable to academy members through the EAB website.
- Published over 500 DIY How-To articles about boat design, construction, inspection, operation, maintenance, troubleshooting and repair. We are working hard to do more.
We are currently formatting and polishing the Anchors Aweigh Academy online and hands-on courses. The Marine Surveying course has proven to be excellent for both the beginner and the seasoned surveyor, and especially helpful to the Do-It-Yourselfer.
Current Academy Members must SIGN IN to gain FULL access to this
website including expanded pages and valuable Academy programs
like our Academy Lending Library and our Ask-An-Expert Program!
If your membership has expired, CLICK HERE to Renew.
IF YOU ARE NOT YET AN ACADEMY MEMBER,
CLICK HERE to discover how you can become a Member and gain FULL access to
thousands of expanded pages and articles, and dozens of excellent programs
WITH JUST A SMALL DONATION!
Thank you for your support. You make this website possible.
Comments for Public Viewing
Submit any comments for public viewing via email
Please remember to put this webpage's title in the subject line of your email.
All comments are moderated before they appear on this page. See Comment Rules.
FROM Donald: "This is an awesome website. I found the information that I needed right away from one of the over 20,000 free articles that you provide as a public service. I'm surprised that so much if this site is free. But I still signed up so I could access the thousands of expanded pages, interesting articles, and dozens of valuable programs! The member's library of books, magazines and videos that I can view online is really terrific! I understand that you and your staff are all unpaid volunteers. Please keep up the good work. And I commend you for your plans to add another 10,000 free informative articles over the next year. I'm thrilled to support you in this endeavor with my small membership donation. Thanks again for all your hard work."
FROM Huey: "I agree with my Uncle, I too have found the articles to be very enlightening. They say that it will take about 100,000 articles to cover the full scope that they have envisioned for the website. They have over 20,000 articles so far and that's doing pretty well, but it could take several years to get the rest. I also noticed that many of the Main Topic Pages and some of the article pages are still in the rough draft stage. I guess that they will fill in as they can get volunteers to work on them. But what I can't figure out is why anyone would spend the time writing informative in depth articles just to give away free to this website for publication? What's in it for them?"
FROM Dewey: "Well Huey, to me It looks like most of the articles on this website are written by very informed people, like boating instructors, boat designers, boat builders, riggers, electricians, fitters, marine repair technicians and marine surveyors. Writing such articles helps establish them as knowledgeable professionals. After all, this website was originally created by a school for marine technicians and marine surveyors. The website is growing in content every day. They even had to move to a bigger, more powerful server because the website's traffic has been growing exponentially."
FROM Louie: "I agree with everyone above. This site is quickly becoming the ultimate reference resource about every aspect of boats and ships for everyone from the beginning recreational boater to the seasoned professional mariner. I use the topic pages on the right sidebar to browse around the website. It's like a Junior Woodchucks' Guidebook for Boaters. Their Members' Library of over 300 popular and obscure books and over 200 magazine back issues that can be viewed online is fabulous. The Academy's magazine is especially informative. On top of that, there is the "Ask-An-Expert program for members where you can get an expert's answer to any of your boat questions. And a whole years membership is only $25. What a deal! I really love being part of this "Everything About Boats" community and help provide thousands of helpful articles free to the public. I think that I'll sit down right now and write an article about my experiences boating with my uncle."
FROM Scrooge: "You rave about this website like it was the best thing since sliced bread. Well, I think it stinks. Sure, it has a lot of good information for boaters, and they're adding more every day, but it will probably never be finished. Furthermore, I don't even own a boat. And I wouldn't have a boat even if someone gave me one. Boats are a waste of money and time and energy and money! They're just a hole in the water you pour money into. If you gave me a boat, I'd sell it quicker then you could say Baggywrinkle. Then I'd lock up the cash with all my other money so I could keep my eye on it and count it every day. Bah humbug."
FROM Daisy: "I'm just so glad that Donald got the boat so we and the boys could enjoy boating — together. And of course all of the girls, April, May, and June, love to be on the water too, especially when that is where the boys are. Oh poor Scrooge, boating is more fun then you could possibly imagine."
FROM Scrooge: "After seeing how much fun you all have on the water together, I regret that I didn't have that much fun when I was young. I've had a change of heart, and I'm giving each of you a Lifetime Academy Membership."
FROM Editor: "For those of you that have stayed with us this far, many thanks. You inspire us to keep working on this labor of love. We know that we have a lot more to do. Ultimately, we hope that we can help you enjoy the wonder filled world of boating as much as we do. We are all waiting to see what you have to say about this webpage article. Submit any comments via email To⇒Comments@EverthingAboutBoats.org. Be sure to include this page's title in the subject line. Also, your corrections, updates, additions and suggestions are welcomed. Please submit them via email To⇒Editor@EverthingAboutBoats.org. Let's work together on this."